Tattoo Power Supply Settings – All That You Need To Know

The tattoo power supply settings are not that easy as you suppose they are. They are a little confusing and need you to be aware of those topics. While the tattoo gun settings differ, some can be easy and simple while others can be hard to understand and operate. The elementary settings pose no threat and are easy to work and understand but those involving digital displays, the switches of different colors, multiple jacks, and a number of knobs require proper understanding.

You do not need to be perplexed anymore because we know what is here to assist you. We have listed everything down about the settings that you possibly want to know. We have all that laid out so that you don’t need to look any further. To figure that out, have a read and know everything.

First off you need to be well educated about the subject of power supply and what exactly the role it plays is. The power supply not only determines the electricity and whether it is being fed or not but it also tells you how much of the electric current the machine is getting in.

Moving forwards, what will be the appropriate settings for the different modes? What should we select if we need to mode to be linear or if we need it to be shader? Dive in!

Short Answer

Liner Voltage

7.5-8.5 is the perfect range that should be on once you decide to run your tattoo machine in liner mode.

Shader Voltage

The appropriate range of the shader is 8-10 volts. It is recommended by most tattooists.

Elementary Power Supplies of Tattoo Machine

The elementary power supplies are not that difficult to operate and use but you do require some knowledge. If you own a tattoo machine that has basic settings, there will be a power switch along with a simple knob, clip cord, and a foot pedal. The knob is provided so that it controls the voltage and provides you the appropriate rating which is needed.

The working is more than simple. All it requires is to turn on the machine after connecting the power switch as well as the foot pedals. Once that is done, the voltage adjustment is to be done and that is it. You are done.

The voltage rating needs to be between 4 to about 12 volts. This is ideal and it can adjust in all the modes. The speed can be set up to fix the modes. You would want a fast machine for lining work and the shading one requires the machine to run slow. The voltage also has a major impact on the speeds. The larger the voltage, the faster the machine runs. You do need to give a thought to how good the machine is and how fast it can run.

Advanced Power Supplies For Tattoo Machine

Advanced machines need proper guidance and you do need sufficient information to operate the machine perfectly. The multiple machines sometimes run with the same plug. The liner plus the shader have their separate plug so that you don’t spend your time changing the plugs once you require different modes.

The switch is provided for the convenience that aids you in changing between the modes which are labeled as L for liner and S for shader which makes your job easier. The machines of this sort are oriented in a way that it consists of two jacks. One is dedicated to controlling the liner one while the other one controls the shader thing. The left jack is meant to control the left one and the right one to control the right one.

These machines usually have a digital screen which aids you to get to know the settings. Whether it is the current-voltage or it is the duty cycle, it has got you all covered.

The Digital Power Supply Settings For Tattoo Machines

The digital ones are complex but they are best as they don’t require the use of knobs because they don’t have one. The navigation menu is provided on a digital LED which determines which voltage you have to select for the appropriate modes.

The preset feature is also included which assists you to set and save your settings and this will aid you to use the same one whenever you wish.

The Settings of Power Supply Explained

  • Power Supply: The operation of the power supply is simple. It is used to turn the machine on and turn it off.
  • Phone Jacks: Jacks are provided at the place where the machines are hooked.
  • Switch: In case you have hooked multiple machines, the switch plays its part to choose the relevant machine and flip to the desired one with utmost convenience.
  • Digital Screen: If you require information about the voltage and the duty cycle, a digital screen is where it is displayed.
  • Knobs: To adjust the voltage levels, knobs are provided which helps you to set and control the voltage.
  • Voltage: The appropriate voltage which should be set is between 4 and 12 volts. It is the power which you provide to the machine. This will tell the machine how fast it is going to run but it also determines how quickly it will overheat. So selecting it in between the range of 4-12 volts is the most appropriate.

Speed Which You Should Operate Your Tattoo Machine On

This is determined based on what machine you use and the tuning of your machine. The remaining is set by the guidelines.

Leave a Comment